Absolutely bloody amazing

[BlazinDragon]

Well... i havent seen u guys in a VERY VERY VERY...ect.. long time... well... for good reason.. my router has not worked for a good at least 6 months... and ive played this game for 6 years goin on 7 this christmas... i'd just like to spend my free time (when im not playing World of Warcraft) with u guys, and remmber the old times

I NEED U TO HELP FIX MY ROUTER!

Windows ME
Pentium 3
512 MB RAM
alot of memory
2105 NR Netcore Broadband Router - NON WIRELESS
ummm what else... cable internet connection

Anyways just to let u know... the person named BlazinDragon that pops in a server for 30 seconds at a time is me aka Dragoon aka, the long list of names.... i hope someone can help me play with u guys!!!

Miss ya all :X

~BlazinDragon

[Odin]

Windows ME

Ok, before we do anything, we need to take care of this. Upgrade to at least Win 2000.

512 MB RAM
alot of memory

Uhh... that's the same thing. Unless by "alot of memory" you mean the CPU cache. Or possibly the hard drive space.

Anyways, you should look in Technical Help. I bet you'll get help there.

[KRSplat]

WB! Go to Technical Help.

[Odin]

Go to Technical Help

Do not pass Misc., do not collect 200 posts...

[BlazinDragon]

its been a year since i last posted... gimme some leeway! >_<

[Sonyk]

Okay then, let's start at the basics. Firstly, Windows ME wasn't exactly made for networking, so upgrading to 2000 like Odin suggested might be a good start.

Second, did you try opening your ports?

[BlazinDragon]

I have cogeco security services stuff, and have looked into the firewall section, and i open the stats for JJ2 and i see the ports... but the thing is... here are the steps i go thru to check on the ports

1.) open cogeco interface
2.) Firewall, advanced
3.) application control
4.) jj2.exe, details
5.) ive selected allow application and ports (there are 191 ports) for all of them
6.) gone into outbound, UDP and find ONLY 10052 in the allowed (DENIED IS EMPTY FOR ALL OF THEM inbound/outbound TCP + UDP)
7.) also, backtrack... i go into TCP and find 10052, 10053 and 10054 ALLOWED
8.) backtrack to inbound and UDP and find ONLY 10052 allowed
9.) backtrack to TCP and ONLY 10052 is allowed

I hope this helps... but at the moment getting an upgrade is out of the question, i got no $, and most likely no permission ;p

[Odin]

<s>Buy it from China</s>

[Torkell]

Ignore those who say you should upgrade to Windows 2000. Windows ME is a perfectly fine operating system, and it's unlikely to be the problem.

What you need to do is on your router forward ports 10052-10054 UDP and TCP to your computer's IP address. Exactly how you do this depends on your router, so check the manual and/or online help for it.

[BlazinDragon]

I have cogeco security services stuff, and have looked into the firewall section, and i open the stats for JJ2 and i see the ports... but the thing is... here are the steps i go thru to check on the ports

1.) open cogeco interface
2.) Firewall, advanced
3.) application control
4.) jj2.exe, details
5.) ive selected allow application and ports (there are 191 ports) for all of them
6.) gone into outbound, UDP and find ONLY 10052 in the allowed (DENIED IS EMPTY FOR ALL OF THEM inbound/outbound TCP + UDP)
7.) also, backtrack... i go into TCP and find 10052, 10053 and 10054 ALLOWED
8.) backtrack to inbound and UDP and find ONLY 10052 allowed
9.) backtrack to TCP and ONLY 10052 is allowed

I hope this helps... but at the moment getting an upgrade is out of the question, i got no $, and most likely no permission ;p

Thats all i know what to do for my firewall... but i dont know how to interact with my router

[Torkell]

What's your computer's IP address?

To find out, go to Start and then Run. Enter winipcfg.exe and hit OK.

[BlazinDragon]

my ip address is: 192.168.1.22... but i think it may change slightly.. im not sure

I have gone to http://192.168.1.22 and entered as guest, but i dont know what to do from there

[reima]

if you dont have a Static router IP then is the Standard IP Adress to conect to your router:192.168.1.1

you can this turn on the Browser or on "run" WITH TELNET
("TELNET 192.168.1.1")

there you can open/close your ports and configurate your Firewall

BTW: the standard PW of the router is usualy "1234" and the name "admin".
if you forgot you changed password then you can reset the router (usualy behind the router with a stick you can make this)


Good luck

reima

[BlazinDragon]

uhhhh that didnt work... i tried "admin" as the username and 1234 as the pass... no luck ='[

[Pako]

uhhhh that didnt work... i tried "admin" as the username and 1234 as the pass... no luck ='[
Put nothing in the username and "admin" as the password.

[BlazinDragon]

nope ='[

[Hare]

...ME is a perfectly fine operating system...

http://upload.wikimedia.org/wikipedia/en/3/3b/Windows_9X_BSOD.png

[BlazinDragon]

anyone have advice that can... help?

[Torkell]

You could also try "admin" with no password, or "admin" for both username and password.

And Hare, I repeat my previous statement that Windows ME is a perfectly fine operating system.

[BlazinDragon]

hmmm... this isnt working... is there anything i can do to my router (without damaging it mind you) that can reset everything and i can make my own username and password?

[DanYjel]

Ignore those who say you should upgrade to Windows 2000. Windows ME is a perfectly fine operating system, and it's unlikely to be the problem.
Without any discussion, W2K is the most stable Widnows system ever and what is important, it uses NT technology, without which you are like dead.

[BlazinDragon]

GUYS... please no discussion of windows 2K i am stuck with windows ME until i win a lottery and am somehow able to buy a new computer... i need suggestions on how to fix the problems with my router so i can play this game... not to argue about which is better... i might know which is better, and im stuck with the worse one... i just need the topic concentrated on the router and the internet!!!!

Router: Netcore 2105 NR Broadband Router
OS: Windows ME
Internet: cogeco cable
IP: 192.168.1.1

Tried changing ports?

1.) open cogeco interface
2.) Firewall, advanced
3.) application control
4.) jj2.exe, details
5.) ive selected allow application and ports (there are 191 ports) for all of them
6.) gone into outbound, UDP and find ONLY 10052 in the allowed (DENIED IS EMPTY FOR ALL OF THEM inbound/outbound TCP + UDP)
7.) also, backtrack... i go into TCP and find 10052, 10053 and 10054 ALLOWED
8.) backtrack to inbound and UDP and find ONLY 10052 allowed
9.) backtrack to TCP and ONLY 10052 is allowed

[Sonyk]

is there anything i can do to my router (without damaging it mind you) that can reset everything and i can make my own username and password?
Many routers have a small hidden button on the back that can only be pressed with a pointed object, if yours has one like that, you could try pushing it with a pen or something for about 30 seconds.