Quote:
Originally Posted by ShadeJackrabbit
Wait... so let me get this straight:
The parameters of 1 are always identical to the parameters of 5.
Same for 2 and 6.
Therefor you just don't use 5 or 6?
|
Yeh, I will check now if this causes problems by removing parameters 5 and 6 from JCS.ini, then making a new event with params 1-4 set, then saving, and then putting back params 5 and 6 and reloading BCCS and the level... I'll be back soon ;p
EDIT: I did:
-Removed params 5 and 6 from event 46 in JCS.ini and saved
-Loaded BCCS and Binnen.j2l and selected a random event 46 and remembered its values (didn't copypaste it)
-Created a new blank level and recreated the previously remembered event 46 in it
-Saved the level, closed BCCS and put the params back in JCS.ini
-Loaded BCCS and my blank level and checked the event I put there
Result:
Although I did not (enable me to) specify parameters 5 and 6, they had values identical to parameters 1 and 2 respectively. All 5th and 6th parameters can be taken out of the ini file =)
EDIT: Parameter 4 happened to be 'automatically set' too, so I removed that one from the ini file too.
__________________
Last edited by Jerrythabest; May 23, 2007 at 12:44 PM.
|